Signode BXT2-32

The BXT2-32 tool is perfect for HD strapping applications in lumber and metals, which were stuck with steel banding and manual tools in the past.  Powered by a 36 volt lithium Ion battery, the BXT2-32 works with 1″ and 1 1/4″ PET strapping with a maximum joint efficiency of 75%. This tool is sold with 2 BOSCH batteries and a charger.

Used steel & plastic strapping tools

With a fast and growing demand for the used steel and plastic strapping tools. The best brands are the Signode, Orgapack, Cyklop and Fromm. When buying used tools from Strapco we also give a warranty on all used tools. If you don’t see a particular tool on here feel free to email or call with the model tool you are looking for.

Signode BXT-32

Signode BXT2-32

The BXT2-32 tool is perfect for HD strapping applications in lumber and metals, which were stuck with steel banding and manual tools in the past.  Powered by a 36 volt lithium Ion battery, the BXT2-32 works with 1″ and 1 1/4″ PET strapping with a maximum joint efficiency of 75%. This tool is sold with 2 BOSCH batteries and a charger.[tcp_list id=”A480″]

Rapz Crimpper

The Rapz single notcher is a pneumatic steel strapping sealer. This applies two sets of notches each time the trigger is pulled which saves time and labor for the operator. Other pneumatic strapping sealers require the operator to pull the trigger, move the sealer on the seal, and pull the trigger a second time. This applies all four notches at once. A single notch seal equates to roughly 50% joint efficiency, while a double notch is 70-80% efficiency. Using a double notch sealer guarantees the best and strongest seal at the weakest spot, the joint.[tcp_list id=”Rapz_Crimpper”]
Signode BXT-32

Signode BXT2-32

The BXT2-32 tool is perfect for HD strapping applications in lumber and metals, which were stuck with steel banding and manual tools in the past.  Powered by a 36 volt lithium Ion battery, the BXT2-32 works with 1″ and 1 1/4″ PET strapping with a maximum joint efficiency of 75%. This tool is sold with 2 BOSCH batteries and a charger.[tcp_list id=”Signode BXT-19″]
Fromm P327

Fromm P327 5/8″

The Fromm P327 is 5/8″ tool has numerous advantages that make this tool stand out among many work rooms. With a new reinforced 18 volt motor, the P327 can complete up to 450 strap cycles per battery charge. Its Li-Ion battery technology ensures battery protection and high tension force with adjustable tension speed. The P327 is simple to operate saving time, money, and operator fatigue..[tcp_list id=”Orgapack_OR-T83″]
OR-T 83

Orgapack OR-T 50

The OR-T 50 Has been sold.

Fromm A391

Semi-automatic strapping tool for the pneumatic tensioning and manual sealless joining of steel straps. The pneumatic drive for the tensioning system guarantees fast and uniform tensioning. The low tool weight (only 5.1 kg) permits efficient working without the need for suspension. This tool is set for 3/4″ steel.[tcp_list id=”Fromm_A391″]
ORT 250

Orgapack OR-T 400 BRAND NEW

The Orgapack OR-T 400 is now the most user friendly tool for plastic strapping that runs automatically, semi-automatically, manually or in soft corner mode for fragile loads.   Using a 18 volt Li-Ion Bosch battery, the OR-T 400 can complete up to 400 applications per full charge. This tool has a fully adjustable tensioning force of up to 880 pounds, and also has an adjustable strap width option. Orgapack’s OR-T 400 seals automatically or with the touch of a button using a friction weld seal. The OR-T 400 includes 2 Lithium batteries (18 volt) and 1 charger. It also has a “soft” mode that makes it safe to strap small or fragile packages.[tcp_list id=”Rapz_PHDX_1100″]

Fromm P327

The Fromm P327 tool has numerous advantages that make this tool stand out among many work rooms. With a new reinforced 18 volt motor, the P327 can complete up to 450 strap cycles per battery charge. Its Li-Ion battery technology ensures battery protection and high tension force with adjustable tension speed. The P327 is simple to operate saving time, money, and operator fatigue.[tcp_list id=”Fromm_P327″]
Signode PN2-114

Signode PN2-114

The Signode PN2-114 is a pneumatic feedwheel push type tensioner for steel strapping to secure round or irregular shaped packages. In warehouses and shops where the operator is on their feet and on-the-go, this Signode PN2114 tool can be conveniently transported from one place to another. The tension is very uniform and precise. The Signode PN2-114 is generally used with a pneumatic sealer. Only 1 left in stock!

Signode PN2-114 Pusher

The Signode PN2-114 is a pneumatic pusher tensioner for steel strapping to secure round or irregular shaped packages. The PN2-114 is light enough it does not have to be counter balanced. This tool is very mobile and is standard in steel service facilities. This tool can do 3/4″ – 1-1/4″ .044 thickness.[tcp_list id=”signodebuy”]

 

Signode VT-19HD

Signode VT-19

The Signode VT-19HD is a light weight pneumatic combination tool. This tool can be used with 5/8″” – 3/4″ PET or PP strapping and has a tension force of 800 pounds.[tcp_list id=”Signode_VT-13″]